Specifications

PN 718113AF
31
Laser Induced Fluorescence Detection
Operation
2 After installing the vials in the tray, close the instrument lid and click Next.
The screen shown in Figure 24 is displayed while the calibration is running. Please wait until
the instrument has completed its calibration, which may take several minutes.
WARNING
DO NOT open the instrument doors during this step.
Figure 24 Calibration Wizard Running Screen
Calibration Wizard – Step 4
When the Calibration is completed, the calculated value (or CCF) for the channel selected is
displayed. Clicking
Accept will cause this value to be used during subsequent analysis. If Cancel is
selected, the previously stored value will be retained.
Figure 25 Calibration Wizard – Step 4 Screen