Programming instructions

34
b. System then begins monitoring the engine speed.
c. System sees the engine speed at two times idle.
BlackJax begins 20 second countdown.
4. After a 20 second countdown:
a. 5 siren chirps as reminder to enter PIN code.
b. Brake light output pulses to flash brake lights.
c. You then have 20 more seconds to enter PIN to turn off
Blackjax.
5. If PIN code is NOT entered within 20 seconds:
z
System sounds siren and begins flashing parking lights.
z
Brake lights continue to flash.
z
The system will now immobilize as described in steps 6-7.
6. If system sees the engine speed return to 1 ½ times idle or
lower, the system will immobilize the vehicle as described in
step 7.
7. Vehicle Immobilization:
z
Immobilizer will engage the starter and ignition circuits.
z
The siren will continue to sound and the parking and
brake lights will flash for a maximum of 5 minutes.
z
Immobilization circuits will remain active until correct
PIN code is entered.
blackjax deactivation sequence
To deactivate BlackJax turn the key on and then enter the PIN code at
any time.