Specifications

2-44. A5500 MODULES AND ASSEMBLY REPLACE. (CONT)
NOTE
Modules A5200 through A5400 are secured with captive screws. Steps 3 and 4 are typ-
ical for all modules.
3.
4.
5.
6.
7.
Using screwdriver, loosen captive screws (5).
To prevent damaging pins, do not twist
Carefully pull module (6) off board to release from pins.
NOTE
Filter module FL5001 is secured with locknuts and is solder to printed circuit board.
Using wrench, remove locknuts (7).
module from side to side.
TM 11-5820-670-30
EL1AT017
CAUTION
Care must be taken when performing next step to prevent damaging printed circuit
board.
Using soldering iron, unsolder pins (8) of module (9) from printed circuit board.
Carefully pull module (9) off board.
2-167