Specifications

TM 11-5820-670-30
2-45. A8700 MODULES AND ASSEMBLY REPLACEMENT. (CONT)
REMOVAL (CONT)
8. Remove two C-clips (1) from hinge pins (2).
9. Remove two hinge pins (2) from hinges (3).
10. Using screwdriver, loosen two captive screws (4).
11. Carefully lift P8701 (5) off pins (6).
12. Remove assembly (7).
INSTALLATION
CAUTION
Before installing assembly, ensure pins (6) are not bent. Straighten any bent pins.
Extreme care must be taken not to damage pins.
1. Position P8701 (5) on pins (6) and push into place.
2. Using screwdriver, tighten two captive screws (4).
3. Position assembly (7) in hinges (3).
4. Install two hinge pins (2) in hinges (3).
5. Install two C-clips (1) on hinge pins (2).
NOTE
EL1AT025
If modules were not removed from assembly, proceed to step 11 for installation of
assembly.
2-174