User manual

1200 Series Variable Wavelength Detector User Manual 45
Using the Detector 4
Preparing the HPLC System
1 Turn on the Agilent ChemStation PC and the monitor.
2 Turn on the 1200 series HPLC modules.
3 Start the Agilent ChemStation software (B.02.01). If the pump,
autosampler, thermostatted column compartment and detector are found,
the ChemStation screen should look like shown in Figure 10.
The System status is red (Not Ready).
Figure 10 Initial ChemStation screen (Method and Run Control)
On-line plot window details window
System status