User manual

50 1200 Series Variable Wavelength Detector User Manual
4Using the Detector
Figure 15 Detector Settings (default)
• 1 signal with individual wavelength setting
• stop and post time can be set (if required)
• peakwidth depends on the peaks in the
chromatogram, see page 61.
• time table for programmable actions during the
run
• Zero Offset Limits: 1 to 99% in steps of 1%
• Attenuation Limits: 0.98 to 4000 mAU at discrete
values for either 100 mV or 1 V full scale
• see “Special Setpoints" on page 60
• autobalance to zero absorbance (on the analog
output plus offset) at begin and/or end of run
• additional signals can be stored with the normal
signal (for diagnostics)