User manual

1200 Series Variable Wavelength Detector User Manual 59
Using the Detector 4
Analog Output Settings
1 To change the Output Range of the analog outputs select VWD Control.
2 To change the offset and the attenuation select VWD Signal - More.
3 Change the values if required.
Figure 23 Analog Output Settings
• Analog Output Range: can be
set to either 100 mV or 1 V full
scale.
• Zero Offset: can be set to either
100 mV or 1 V full scale.
• Attenuation Limits: 0.98 to
4000 mAU at discrete values for
either 100 mV or 1 V full scale.