User manual

98 1200 Series Variable Wavelength Detector User Manual
8Maintenance
Replacing the Interface Board
When required When defective or for installation of the board or for all repairs inside the
detector.
Part required Interface board (BCD) G1351-68701 with external contacts and BCD outputs.
LAN Communication Interface board G1369A or G1369-60001.
Tools required None
1 Install the ESD strap. Move the power lock across the
power inlet.
2 If required, unscrew and remove the interface board.
Place the board on the ESD kit.
3 If required, insert the interface board and fix the screws.
Next steps:
• Remove the ESD strap.
• Reinstall the module into the stack.
ESD strap
power lock