User manual

parameter descriptions vacon • 127
24-hour support [phone] • Email: [e-mail]
9
9.11 Prohibited Frequencies (Control panel: Menu PAR -> P11)
11.1 PROHIBIT FREQUENCY RANGE 1: LOW LIMIT
11.2 PROHIBIT FREQUENCY RANGE 1: HIGH LIMIT
11.3 PROHIBIT FREQUENCY RANGE 2: LOW LIMIT
11.4 PROHIBIT FREQUENCY RANGE 2: HIGH LIMIT
Two skip frequency regions are available if there is a need to avoid certain fre-
quencies because of e.g. mechanical resonance. In this case the actual fre-
quency reference sent to the motor control will be kept out of these ranges
according to the example below, where one range is in use.
Actual Reference
Requested Reference
Low Lim High Lim
Low Lim
High Lim
Figure 9.16: Frequency Range