User manual

1
1.Safety 1
1.1Warnings 1
1.2Safety instructions 3
1.3Earthing and earth fault protection 3
1.4Before running the motor 5
2.Receipt of delivery 6
2.1Type designation code 6
2.2Storage 6
2.3Maintenance 7
2.3.1Capacitor recharge 7
2.4Warranty 8
2.5Manufacturer’s declaration of conformity 9
3.Installation 10
3.1Mechanical installation 10
3.1.1Vacon 20 dimensions 14
3.1.2Cooling 18
3.1.3Power losses 19
3.1.4EMC levels 26
3.1.5Changing the EMC protection class from C2 to C4 27
3.2Cabling and connections 29
3.2.1Power cabling 29
3.2.2Control cabling 31
3.2.3Allowed option boards in Vacon20 35
3.2.4Screw of cables 38
3.2.5Cable and fuse specifications 40
3.2.6General cabling rules 43
3.2.7Stripping lengths of motor and mains cables 44
3.2.8Cable installation and the UL standards 44
3.2.9Cable and motor insulation checks 44
4.Commissioning 46
4.1Commissioning steps of Vacon 20 46
5.Fault tracing 48
6.Vacon 20 Application Interface 54
6.1Introduction 54
6.2Control I / O 56
7.Control panel 58
7.1General 58
7.2Display 58
7.3Keypad 59
Document: DPD00716F1
Release date: Aug. 2014
Software package: FW0107V010.vcx