User manual

control panel vacon • 59
24-hour support [phone] • Email: [e-mail]
7
Figure 7.1: Vacon 20 Control panel
7.3 Keypad
The keypad section of the control panel consists of 9 buttons (see Figure 7.1). The
buttons and their functions are described as Table 7.1.
The drive stops by pressing the keypad STOP button, regardless of the selected con-
trol place when Par. 2.7 (Keypad stop button) is 1. If Par. 2.7 is 0, the drive stops by
keypad STOP button only when control place is keypad. The drive starts by pressing
the keypad START button when the selected control place is KEYPAD or LOCAL con-
trol.
1 2 3 4 5
6 7 8 9 10
11
13
14
12
READY RUN STOP ALARM FAULT
FWD REV I/O KEYPAD BUS
SYS
PAR
REF
MON
BACK
RESET
LOC
REM
OK