User manual

64 • vacon control panel
Tel. [phone] • Fax [phone]
7
Code Monitoring signal Unit ID Description
V1.1 Output frequency Hz 1 Output frequency to motor
V1.2 Frequency reference Hz 25
Frequency reference to motor con-
trol
V1.3 Motor speed rpm 2 Calculated motor speed
V1.4 Motor current A 3 Measured motor current
V1.5 Motor torque % 4
Calculated actual / nominal torque
of the motor
V1.6 Motor shaft power % 5
Calculated actual / nominal power
of the motor
V1.7 Motor voltage V 6 Motor voltage
V1.8 DC-link voltage V 7 Measured DC-link voltage
V1.9 Unit temperature °C 8 Heatsink temperature
V1.10 Motor temperature % 9 Calculated motor temperature
V1.11 Output Power KW 79 Output power from drive to motor
V2.1 Analog input 1 % 59
AI1 signal range in percent of used
range
V2.2 Analog input 2 % 60
AI2 signal range in percent of used
range
V2.3 Analog output % 81
AO signal range in percent of used
range
V2.4
Digital input status DI1,
DI2, DI3
15 Digital input status
V2.5
Digital input status DI4,
DI5, DI6
16 Digital input status
V2.6 RO1, RO2, DO 17 Relay / digital output status
V2.7
Pulse train / encoder
input
% 1234 0 - 100% scale value
V2.8 Encoder rpm rpm 1235
Scaled according to Encoder
pulses / revolution parameter
V2.11 Analog input E1 % 61
Analogue input signal 1 in % from
option board, hidden until an
option board is connected
V2.12 Analog output E1 % 31
Analogue output signal 1 in % from
option board, hidden until an
option board is connected
Table 7.2: Monitoring values