User manual

control panel vacon • 69
24-hour support [phone] • Email: [e-mail]
7
In active fault situation, FAULT arrow is blinking and the display is blinking active
fault menu item with fault code. If there are several active faults, you can check it by
entering the active fault submenu F5.x. F5.1 is always the latest active fault code. The
active faults can be reset by pressing BACK / RESET button with long time (>2 s),
when the API is in active fault submenu level (F5.x). If the fault cannot be reset, the
blinking continues. It is possible to select other display menus during active fault, but
in this case the display returns automatically to the fault menu if no button is pressed
in 10 seconds. The fault code, subcode and the operating day, hour and minute val-
ues at the fault instant are shown in the value menu (operating hours = displayed
reading).
Note! Fault History can be reset by long pressing the BACK / RESET
button for 5 second time,when the API is in fault history sub-
menu level (F6.x), it will also clear all active faults.
See Chapter 5 for fault descriptions.