Installation guide

ffeeaattuurree ddeessccrriippttiioonnss

AACCTTIIVVEE//PPAASSSSIIVVEE AARRMMIINNGG::

When active arming is selected,

the system will only arm when the transmitter is used. When set

to passive, the system will arm automatically 30 seconds after the

last door is closed. Passive arming is indicated by the rapid flash-

ing of the LED when the last protected entry point is closed.

22 CCOONNFFIIRRMMAATTIIOONN CCHHIIRRPPSS OONN//OOFFFF::

This feature controls

the chirps that confirm the arming and disarming of the system.

33 NNOO FFEEAATTUURREE

44 NNOO FFEEAATTUURREE

55 NNOO FFEEAATTUURREE

66 NNOO FFEEAATTUURREE

77 CCOODDEE HHOOPPPPIINNGG

™™

OONN//OOFFFF::

This system features Code

Hopping

™

as an option. Code Hopping

™

is a feature that uses a

mathematical formula to change the system’s code each time the

transmitter and receiver communicate. This makes the group of

bits or "word" from the transmitter very long. The longer the

word is, the easier it is to block its transmission to the unit.

Disabling the Code Hopping

™

feature lets the receiver ignore the

Code Hopping

™

part of the transmitted word. As a result, the

unit may have better range with Code Hopping

™

off.