Operating instructions

Use in Combination with Other Programs
You can use a density program in combination with other application
programs assigned to the f key. This means you will have all functions of the
combined programs available in addition.
It is especially convenient to combine the density program with the application
program listed below:
Application program Code
Tare memory 2 2 2
Liquid for Buoyancy/Reference Liquid
You can enter the temperature so that the balance can allow for the effect of this
temperature on the liquid of immersion (reference liquid for the specific gravity
bottle method) when calculating the density of your sample.
Access the parameter mode to choose the liquid for sample immersion/reference
liquid and to allow for the various parameters.
To access the parameter mode: Hold down the i key for more than 2 seconds
To select a parameter: Press ^ – f
To enter a value: Use the numeric keys
To confirm an entry: Press STO – F
To store an entry: Press STO – F
The following values are stored in the non-volatile memory:
– Temperature
– Density of the liquid
– Volume expansion coefficient
– Function for calculation of the density of the liquid
3–35