Operating instructions

Tare Memory
Tara Memory Code 2 2 2
Symbol displayed when a value is stored: Net
Key identified by: TAR - f
Press the f key identified by “TAR” to accept and store a weight on the pan
or a numeric entry as a tare weight (this procedure is indicated by “Net” on the
display). The balance is now tared automatically so you can weigh again starting
with a zero readout.
If you have stored a value in the tare memory, a “1” will be printed or output after
the ID of this value to identify it as such on the printout or on the computer screen.
By selecting the appropriate menu code, you can have the tare weight “T1” or
“PT1” instead of the net weight or value “N1” automatically output via the interface
once you have stored it with f identified on the display by “TAR.”
If you combine the tare memory function with another program and have stored
a value in the tare memory, a “1” will be printed or output after the ID of this value
to identify it as such on the printout or on the computer screen.
Use in Combination with Other Programs
The tare memory program can be used in combination with other application
programs. This means that you will have all functions of the combined program
available in addition.
Program Code
For MC 210 S, For MC 5(-0CE),
MC 210 P, SC 2 (-0CE)
MC 410 S (-0CE) and MC 21S
Counting 2 1 4 2 1 4*
Weighing in percent 2 1 5 2 1 5
Density 2 1 7 not applicable
Diameter determination not applicable 2 1 7
* = factory setting
3–44