Operating instructions

Display Parameter for Readouts in Percent
If the weight stored is too light to be displayed according to display parameter set,
the number of decimal places is automatically decreased.
The following display parameters can be set for readouts in percent:
The readout is displayed Code
For MC 210 S, For MC 5(-0CE),
MC 210 P, SC 2 (-0CE)
MC 410 S (-0CE) and MC 21S
Without a decimal place 3 6 1 3 5 1
With one decimal place 3 6 2 3 5 2*
With two decimal places 3 6 3* 3 5 3
With three decimal places 3 6 4 3 5 4
Use in Combination with Other Programs
The weighing-in-percent program can be used in combination with other
application programs. This means that you will have all functions of the combined
program available in addition.
Program Code
Tare memory 2 2 2
Over/under checkweighing (net weight) 2 2 3
Over/under checkweighing (difference in weight) 2 2 4
* = factory setting
3–50