Operating instructions

7–1
Accessories 5 – 7
Adjusting the display unit 1 – 12
Adjusting the sensitivity 1 – 30
Air buoyancy
correction program 3 – 5
Air density determination 3 – 9
Ambient conditions, 1 – 8
adapting the balance 2 – 5
Analog display 3 – 51
Antiheft locking
device, fastening 1 – 37
Application programs 3 – 1
Approval certificate 5 – 5
Area of installation 1 – 8,
1 – 9
Automatic data output 2 – 18
Automatic draft
shield function 2 – 23
Automatic taring 2 – 19
Auto print 2 – 18
Auto Zero function 2 – 6
Backweighing 3 – 15
Balance operating menu 2 – 1
Bar graph 3 – 51
Beep tone
(acoustic signal) 2 – 21
Below-balance weighing 1 – 37
Blocking the function keys 2 – 21
Blocking the numeric keys 2 – 22
Cabling diagrams 4 – 20
CAL function using the f key1 – 31
CAL test using the f key
2 – 15,
2 – 17
Calibration 1 – 30
Calibration test 1 – 34
Checking net weights 3 – 52
Cleaning 1 – 40
Clearing the memory 3 – 31
Code 2 – 1
Combined weighing mode 3 – 15,
3 – 23
Computer-controlled
operation of the draft shield 4 – 10
Connecting the weighing
cell to the computing device 1 – 12
Computer-
controlled operations 4 – 1
Connecting the balance
to AC power 1 – 13
Counting small parts 3 – 62
Data ID codes 2 – 20
Data ID codes K* or NUM 3 – 4
Data input formats 4 – 7
Data interface 4 – 1
Data input/output, to/from 4 – 17
Data output 1 – 36,
2 – 18,
4 – 3
Data output formats 4 – 3
Data output parameters 2 – 18,
4 – 13
Data transfer 2 – 18,
3 – 4
Declarations of conformitiy 6 – 1
Density 3 – 34
Determination of the residue 3 – 48
Determination of the
dry weight 3 – 25
Diameter determination 3 – 42
Differential weighing 3 – 14
Display accuracy 2 – 11
Display accuracy
with the draft shield open 2 – 24
Display backlighting 2 – 22
Display modes 2 – 11
Index
Part – Page Part – Page