Operating instructions

Adjusting the External Draft Shield Element on MC 210 S,
MC 210 P and MC 410 (-0CE)
The draft shield consists of two semicylindrical elements.
Grasp the lower riffled part of the element to turn it to the
position you desire.
In addition, you can move the swivel-mounted display
to the position you desire (+/– 85°).
Adjusting the Aperture Angle of the Draft Shield
A narrow aperture angle will reduce the effects of drafts,
allowing the balance readout to stabilize faster.
To define the aperture angle, manually adjust the draft
shield door to the opening position you desire. Press r or l
to close the draft shield automatically.
This stores the aperture angle you have just adjusted.
Press r or l again, and the draft shield will now open
to the position you selected.