Operating instructions

– Press the f key to change the left-hand number
to “3”
– Press p to move to the middle number
– Now press the p key to move to the right-hand
number (When you move to the right-hand number,
the previously set numeric code will be indicated).
– Press the f key to change the right-hand number
to “4”
Confirm the Code Setting
– You must press the t key in order to confirm
the code you have just set. This is indicated by the
“o” after the code.
– Press c to store the new menu code setting
The current menu code setting in the balance
operating menu is identified by a small “o” after the
last number. When you access the operating menu,
the previously set numeric code will be displayed after
you have selected the left-hand and middle numbers,
which means the entire menu code setting will
be displayed. This makes it easy for you to check
the previously set menu codes.
If you would like to change several menu code
settings, you do not have to press c after each
change to exit the balance operating menu.
2–3