Operating instructions

Stability Symbol Delay
This setting allows your balance to compensate for individual interfering factors
which slowly subside, such as turbulent air currents generated within the
weighing chamber.
Code
No delay 1 4 1
Short delay 1 4 2*
Long delay 1 4 3
Extremely long delay 1 4 4
Tare Parameter
You can define when the balance will perform the taring operation:
Code**
At any time 1 5 1
Not until the readout is stable 1 5 2*
Auto Zero Function
When this zero tracking function is activated, any changes off the zero readout
that are equal to a defined fraction of digits per second are automatically tared.
In other words, it ensures a stable zero.
Code
Auto Zero on 1 6 1*
Auto Zero off 1 6 2
* = factory setting
** = setting does not apply to verified balances approved for use as legal
measuring instruments
2–6