Installation guide

Programming LCD remote

To enter programming mode

Press and hold the button until one long beep is heard.

Programming mode to customize the remote’s response is now

entered.

Beeps/Vibration On/Off

Press to select beeps/vibration On/Off. Beeps alone, vibra-

tion alone, beeps and vibration, or no beeps and vibration can be

selected. Refer to the table below for these settings.

*Note:

This is icon display during programming.

Beep/Vibrate settings Programming response Icon display*

Beeps only (default) 1-beep Siren icon On

Vibrate only 1-vibrate Vibrate icon On

Beep & Vibrate 1-beep and 1-vibrate

Vibrate and siren icon

No Beep and No Vibrate 1 long beep

Vibrate and siren

icons Off

➜

note:

If no buttons are pressed within 5-seconds, pro-

gramming mode will exit with 2-beeps.

➜