Installation guide

Peripheral Plug-in Harness
Super Bright LED, 2-Pin WHITE Plug
The
super bright LED operates at (+) 2 volt DC and plugs into the
two-pin WHITE port. Make sure the LED wires are not shorted to
ground as the LED will be damaged. Multiple LED's can be used, but
they must be wired in series. The LED fits into a 9/32-inch mounting
hole. Be sure to check for clearance prior to drilling the mounting
hole.
NOTE: Never use a BLUE LED in combination with a RED LED.
CONTROL
MODULE
L-_------I DIA-41
© 2008 Directed Electronics- All rights reserved.
BLUE
RED
12