Installation guide

www.directed.com

system features programming

This system has many features that can be programmed to accommodate the user's

personal preferences and make system installation easier. They are listed in two pro-

gramming grids on the following pages. Many features have default settings that have

been programmed at the factory and are indicated in bold type.

The User Selectable Features grid allows the user and installer to change operational

features through the PlainView 2 Valet. The Installer Selectable Features grid allows

the installer to change input/output functions of the system to integrate with the vehi-

cle’s specific characteristics.

cliffnet wizard pro installation software programming

Cliffnet Wizard Pro provides access to all available system features and some that are

not available when manually programming with the Valet switch. Cliffnet Wizard Pro

is compatible with Microsoft Windows 95/98/2000/ME/XP/NT so most program-

ming operations can be accomplished by pointing and clicking with a mouse. This

eliminates the need for programming grids and lengthy programming sequences. For

a complete guide to system programming using the Cliffnet Wizard Pro refer to the

Cliffnet Wizard help menu.

manual programming instructions

Be sure to document changes by taking note of all feature changes made in program-

ming mode.

To enter the User Selectable Features programming:

LED Flashes Trigger type Input description

1 Data Proximity Sensor

2 N/A Not Used

3 Mux 1 Sensor Input

4 Instant Door Pin Input

5 Instant Trunk Pin Input

6 Instant Hood Pin Input

7 Instant Ignition Input

8 Mux 2 Sensor Input

9 N/A Not Used

10 N/A Alarm power reset