User Manual

12 403.CHRYSLER6 2.04 2016 Dodge/Ram 1500
© 2017-01-26 Directed. All rights reserved.
Module programming
Refer to “LED diagnostics and troubleshooting” for more information and for troubleshooting purposes.
1
Wait until the LED turns ON solid red.
Note: To skip the transponder programming and use convenience features only, press
the programming button 5 times. When the LED turns ON solid orange, proceed to
step 2.
2
Insert and turn the key to ON, OFF, then remove the key.
3
Insert and turn the key to ON once more. When the LED starts flashing orange
slowly, turn the ignition OFF, remove the module from the vehicle and reconnect it to
your computer. The web site will automatically recognize that you are moving onto
the second phase of the programming sequence.
4
Click on Submit Key2GO Request.
5
Once the configuration is completed, reconnect the module. The LED turns ON solid
green for 3 seconds, then turns OFF.
You have successfully completed the module programming sequence.