OWNER’S GUIDE INSTALLATION GUIDE Removable DVD Player APPLICABLE FOR MODELS OHV901 OHV901A OHV1021 OHV1021A OHV1202 MODEL DV-POD © 2005 Directed Electronics, Inc.
NON-TRANSFERABLE LIMITED ONE YEAR CONSUMER WARRANTY Directed Electronics, Inc. (Directed) promises to the original purchaser that the new automotive video monitor and/or source unit(s) (the Product) that is purchased and installed from a Directed authorized dealer more than ninety (90) days after the purchase of a new vehicle are warranted for a period of one (1) year from date of purchase of the Product.
Table of Contents Non-Transferable Limited One Year Consumer Warranty . . . . . . . . . . . . . . . . . . . . . . 2 Safety Instructions and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 What’s Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Important . . . . . . . . . . . . . . . . . . . . . . . .
5. Rating (Parental Settings)........................................................................25 6. Default .................................................................................................26 7. Exit ......................................................................................................26 Language Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 1. OSD Language ......................................................
Safety Instructions and Cautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE, USE ONLY THE INCLUDED HARDWARE. DIRECTED ELECTRONICS, INC. DISCLAIMS ANY LIABILITY FOR ANY BODILY INJURY, INCLUDING FATALITIES, OR PROPERTY DAMAGE THAT MAY RESULT FROM ANY IMPROPER OR UNINTENDED USES OF THIS PRODUCT.
Welcome Thank you for your purchase of Directed’s removable and portable DVD player. Prior to operating this unit, please fully read this instruction manual and retain it for future reference. This unit can be used with many of our monitors to allow viewing of movies, digital photographs and for the enjoyment of listening to music.
REPAIRS If the DVD player stops working for any reason, discontinue use immediately and consult with your retailer about any necessary repairs. INSTALLATION Avoid installing the DVD player at a location, where it will be under direct sunlight or a hot air vent. The operating temperature of the unit is from 32–120°F (0–50°C). Install the unit at a dry location, where it is away from condensation. Use only the correct cables during installation.
Controls DVD—MOUNTED The illustration below shows the DVD player mounted in a typical LCD monitor. 2 3 4 5 8 9 6 10 11 13 14 1 7 12 1. LOCK/UNLOCK—To dock or undock the DVD player. 2. OPEN—Press this button to open the access door to mount or dismount a disc. 3. AUDIO—Each press of this button accesses each audio track recorded on the DVD (multiple langauges, commentary, etc.) 4. MENU—Displays the menu on the DVD.
11. STOP—Halts playback. If the Play button is pressed the playback will continue from where stopped. If the Stop button is pressed twice, playback will now start from the beginning. WARNING: DO NOT CLOSE THE LCD SCREEN IF A MEMORY CARD HAS BEEN INSERTED INTO THE DVD PLAYER. THIS CAN CAUSE THE LCD SCREEN TO BREAK OR LEAK FLUID. IF YOU SHOULD COME IN CONTACT WITH LEAKED FLUID, WASH THE AFFECTED AREA THOROUGHLY WITH WATER AND SEEK IMMEDIATE MEDICAL ATTENTION.
DVD—UNMOUNTED The illustration below shows the side of the DVD player when removed from the LCD monitor. VOL PHONE A/V OUT DC 12V 1 1. 2 3 4 5 6 Electrical connector—This connector provides the electrical interface when mounted in the LCD monitor. 10 2. VOL Control—Controls the volume to the phone jack output. 3. PHONE Jack—An optional headphone set can be connected here. 4. A/V OUT Jack—Audio/video output jack. 5. DC 12V Jack—Input power from the AC/DC converter. 6.
DVD—MEMORY CARD MOUNTING Ensure that the memory cards are mounted with the logo side of the memory cards oriented with the arrows as shown below: Memory Stick Logo Side Logo Side Logo Side Secure Digital Compact Flash WARNING: DO NOT CLOSE THE LCD SCREEN IF A MEMORY CARD HAS BEEN INSERTED INTO THE DVD PLAYER. THIS CAN CAUSE THE LCD SCREEN TO BREAK OR LEAK FLUID. IF YOU SHOULD COME IN CONTACT WITH LEAKED FLUID, WASH THE AFFECTED AREA THOROUGHLY WITH WATER AND SEEK IMMEDIATE MEDICAL ATTENTION.
Lock/Unlock Button 12 Insert DVD Player and then slide down until unit locks. Electrical Connector © 2005 Directed Electronics, Inc.
DVD Player—Removal 1. While holding and supporting the DVD player. 2. Move and hold the lock/unlock button to the right. 3. Slide the player away from the screen and carefully remove. © 2005 Directed Electronics, Inc.
Remote Control Unit REMOTE BUTTONS 1 4 2 3 6 7 10 11 14 15 18 19 22 23 26 27 30 31 34 35 38 39 42 43 46 47 5 8 9 12 13 16 17 20 21 24 25 28 29 32 33 36 37 40 41 44 45 1. POWER (source) 28. ANGLE 2. IR (on/off) 29. SUBTITLE (on/off) 3. FM (on/off) 30. DOWN (Cursor) 4. Picture (PIP) (17” & 12” models only) 31. AUDIO 5-7. Numeric 32. ZOOM (2, 3, 4, 1/2, 1/3, 1/4, OFF) 8. UP (display) 33. F.REV (Fast Reverse) 9-11. Numeric 34. PLAY/PAUSE 12.
16. DOWN (display) 37. BACK 17. MENU/PBC 38. STOP 18-19 Numeric 39. NEXT 20. Image (wide, zoom, full, normal) 40. REPEAT 41. POWER (Tuner)* 22. UP (Cursor) 42. DSP (channel display)* 23. SETUP 43. TV/AV (selects Tuner or Aux input)* 24. MUTE (on/off) 44. DISPLAY 25. LEFT (Cursor) 21. TITLE 26. ENTER 45. CH+ (channel up)* 46. CH- (channel down)* 27. RIGHT (Cursor) 47. AUTO (auto programming of TV channels)* 48.
BATTERY REPLACEMENT NOTE: Before using remote after installation, remove the battery plastic protective slip. Remote Controller + side Battery Latch Battery Holder 1. Move the small latch to the right and slide out the battery holder. 2. Remove old battery and replace it with a new battery (CR2025) with the positive “+” sign facing as shown above. 3. Push battery holder back into its compartment until it is locked. PRECAUTIONS 1. Properly dispose of used battery. 2.
1. Press OPEN at the upper right corner to open the door. 2. Load with the recorded side (the shiny side) facing up. With double-sided discs, load with the side you want to watch facing up. Ensure that the disc is seated properly before pushing tray back into its locking position. 3. Push to close the door. UNLOADING DISC 1. Press OPEN at the upper right corner to open the door. 2. Remove the disc. (Avoid touching the recorded surface.) 3.
Basic Functions DVD PLAYBACK 1. Press the remote control’s POWER button to turn on the unit’s power or the power button on the monitor if the DVD player is mounted in the monitor. 2. Select video source (DVD). NOTE: If there is no disc in the DVD player, a “N NO DISC” message will be displayed in the upper left corner of the screen. 3. Load a disc into the unit. The message “READ” will appear in the upper left corner of the screen. 4. DVD playback commences.
2. Press the “FFR” button during playback. Each time this button is pressed, the unit will go into a rapid reverse playback mode. This will be shown on the LCD, depending on the speed of the playback selected. ■ playback FR 2X FR 4X FR 8X FR 20X PLAY PLAY” button, the speed will go back to standard. Press “P NEXT TRACK OR PREVIOUS TRACK (DVD/MP3/CD) NEXT" 1. Press the "N button during playback. ■ MP3/Audio CD The player will skip forward to the next track each time the button is pressed.
SELECTING A TRACK OR CHAPTER Selecting tracks or chapters can be accomplished by either using the remote or front mounted controls. These controls allow the operator to skip over undesirable tracks or repeat a particular track. When playing a DVD, press the numeric buttons on the menu or title page to select tracks. During DVD playback, you can input the desired title number directly. MP3 AND JPEG PLAYBACK ON CD OR MEMORY CARD Place a MP3, or JPEG disc or memory card into the DVD player.
PLAYBACK PROGRAMMING Press the PROGRAM button on the remote to display the Track (T)/Chapter (C) programming menu screen. This allows you to selected those items on a DVD, MP3, or JPEG that you wish to view or listen. Use the arrow navigation keys on the remote to enter the Track and Chapter numbers, and then navigate down to PLAY and press the ENTER button on the remote control.
ADVANCED PLAYBACK (DVD/MP3/CD) REPEAT MODE ■ MP3/Audio CD REPEAT” button is pressed: When the “R REP ONE = The current track will be repeated. FOLDER REP = The current folder will be repeated. FOLDER = All the folders will be repeated. ■ DVD REPEAT” button is pressed: When the “R CHAPTER REPEAT = The current chapter will be repeated. TITLE REPEAT = After the DVD plays, the current title menu will be displayed. REPEAT OFF = The repeat mode will be switched off.
SUBTITLE (DVD) You may change the subtitle language from the one selected at the initial playback setting to a different language, if available. During DVD playback, press the "SUBTITLE" button. A screen icon will appear along with the status/language to be displayed. Each press of the "SUBTITLE" button will cycle to the next available subtitle language, and then back to off. Setup Using the setup menus, you can do the initial setup, adjust the picture quality, and set the various outputs.
System Setup 1. TV SYSTEM According to the Color System of the TV, you can choose the TV System. NTSC: Choose this settings if your DVD player is connected to a NTSC TV. PAL: Choose this settings if your DVD player is connected to a PAL TV. AUTO: Choose this settings if your DVD player is connected to a multi-system TV.
3. TV TYPE 4 : 3 PS (Pan & Scan): Choosing this setting if your DVD player is connected to a normal ratio TV. You can fill the movie to the entire screen of your TV. This might mean that parts of the picture (the left and right edges) won't be seen. 4 : 3 LB (Letter Box): Choosing this setting if your DVD player is connected to a normal ratio TV. You'll see the movies in their original aspect ratio (height-to-width ratio).
6. DEFAULT Choose this option to reset all the setup options (except for password and rating setting) to default settings. 7. EXIT SCREEN SAVER Choose this option to exit the setup options. Language Setup The language setup options are listed below: 1. OSD LANGUAGE The OSD (On Screen Display) Language Menu allows the user to select the language for the on-screen display. Highlight the OSD LANGUAGE option, and press the Arrow buttons to choose the OSD language you prefer.
3. SUBTITLE LANG The Subtitle Lang Menu allows the user to select the language for the subtitle of disc. Highlight the SUBTITLE LANG option, and press the Arrow buttons to choose the subtitle language you prefer. Press Enter to confirm. You can select English, Japan, French, Spanish, Portuguese, Latin, German and Chinese. 4. MENU LANG The Menu Lang allows the user to select the language for the menu. Highlight the MENU LANG option, and press the Arrow buttons to choose the menu language you prefer.
CONNECTIONS VOL PHONE A/V OUT DC 12V 1 2 3 1. Phone—Connection for optional headphones. 2. A/V Out—Audio/Visual output to user provided television set or other monitoring device. The connections to the TV set or other device are listed below. 3. 28 Yellow Video output Red Audio—right channel While Audio—left channel DC 12V—Connection for output from AC/DC adapter. © 2005 Directed Electronics, Inc.
Troubleshooting No Picture Press the POWER (source) button (or the button on the remote) to make sure the DVD player is on. If the DVD menu appears, check the source unit. If no DVD menu appears, check all fuses and power connections to the model. Inspect the connecting cables for any fraying or breakage. No Sound The DVD player is in pause, slow motion, fast forward, or fast reverse mode. Place player in play mode. Picture Rolls Check that the T.V.
The Remote does NOT Function Are there obstacles obstructing the view between the monitor and the remote. The distance between the remote and monitor is too great. The remote is not being pointed at the IR receiver on the DVD player. The batteries in the remote are weak. DISC does NOT Play Parental code is set lower than than allowed by the DVD mounted. Ensure the disk is mounted in the player with the correct orientation (shiny side up). The disk is warped.
Specifications System Laser Semiconductor laser Signal Formats NTSC, PAL Audio Characteristics Frequency Response DVD Video (PCM@ 96kHz) 20 Hz - 40 kHz ± 1dB DVD Video (PCM@ 48kHz) 20 Hz - 20 kHz ± 1dB CD 20 Hz - 20 kHz ± 1dB Signal-to-Noise Ratio 90dB Harmonic Distortion 0.01% Dynamic Range DVD Video 95dB CD 95dB Outputs (A/V Switchbox) Audio (phono jacks) 2 Vrms Video (phono jack) 1 V p-p @75 ohms General Power Requirements 14.4 VDC, 1.75 amps Power Consumption 25.
The company behind this system is Directed Electronics, Inc. Since its inception, Directed has had one purpose, to provide consumers with the finest vehicle security, car stereo products, rear seat entertainment, and accessories available. The recipient of more than 20 patents in the field of advanced electronic technology, Directed is ISO 9001 registered. Quality Directed Electronics products are sold and serviced throughout North America and around the world.
