Operator`s manual

Dionex ICS-1100 Ion Chromatography System
90 Doc. 065289-03 10/12
5.3 Replacing Tubing and Fittings
The Dionex ICS-1100 is plumbed with the tubing and tubing assemblies listed
below.
• The ER Tubing Kit (P/N 070061) contains the four pieces of tubing required
for connections from the RFIC-ER columns to the component panel. This
tubing is initially installed in the Dionex ICS-1100 at the factory.
• 10-32 fittings (P/N 043275) and ferrules (P/N 043276) are used for most
tubing connections. For tightening requirements, refer to Installation of
Dionex Liquid Line Fittings (Document No. 031432). The manual is included
on the Thermo Scientific Reference Library DVD (P/N 053891).
• 1/8-in fittings (P/N 052267) and ferrules (P/N 048949) are used for
connections to the suppressor
REGEN OUT port and the eluent reservoir.
Tubing Size and Type Color Used For
0.125-mm (0.005-in) ID PEEK
(P/N 044221)
Red Connection from pump pulse damper
to pressure transducer
0.25-mm (0.010-in) ID PEEK
(P/N 042690)
Black Connections between other system
components
0.50-mm (0.020-in) ID PEEK
(P/N 042855)
Orange Connection from injection port to
injection valve
0.75-mm (0.030-in) ID PEEK
(P/N 044777)
Green Connection from injection valve to
waste
1.58-mm (0.062-in) ID PTFE
(P/N 014157)
Clear Connection from pump to degas or
eluent reservoir; pump waste
25 L sample loop
(P/N 042857)
Orange Connection between ports
L (1) and
L (4) on the injection valve