Owner`s manual

User-Programmable Features
User-Programmable Features (1 Chirp = OFF, 2 Chirps = ON)
Fea ture
Select
Unmarked 1 Unmarked 2 Unmarked 3 Unmarked 4
✱ 1
AutoProgram New Master
Remote
NOTE 1
Chirps
(Off/LoudChirps/QuietChirps)
(1 chirp/2 chirps/3 chirps)
AutoArming
(Off/On)
(1 chirp/2 chirps)
Arm/Disarm with
Secondary Remote
NOTE 4
✱ 2
Personalized Siren Sounds
Headlight Reminder
(Off/On)
AutoArm & Lock
(Off/On)
(1 chirp/2 chirps)
Auxilliary A Accessory or
Trunk Release with
Secondary Remote
NOTE 5
✱ 3
Play Siren Sounds
Remote Valet Feature
(Off/On)
(1 chirp/2 chirps)
NOT USED
Silent Arm/Disarm with
Secondary Remote
NOTE 5
✱ 4
Siren Duration
(30/60/90 seconds)
AutoStart*
(Neither/Battery/Temperature/Both)
(1 chirp/2 chirps/3 chirps/4 chirps)
FACT
(Off/On)
(1 chirp/2 chirps)
Remote Start with
Secondary Remote
NOTE 5
✱ 5
AutoLock
(Off/Instant/RPM-Dependent)
(1 chirp/2 chirps/3 chirps)
BlackJax
(Off/On)
(1 chirp/2 chirps)
NOT USED
Auxilliary B Accessory or
Timed Headlight Activation
with Secondary Remote
NOTE 5
✱ 6
AutoUnlock
(Off/On)
(1 chirp/2 chirps)
Clear All Remotes
NOTE 3
NOT USED
Window Rolldown/Venting
with Secondary Remote
(Requires Optional
SmartWindows 4)
NOTE 5
✱ 7
Re set All to Fac tory Set tings
(ex cept re mote controls and
valet code)
NOTE 2
Valet Code
SHOULD ONLY BE
PROGRAMMED BY THE VEHICLE
OWNER
NOT USED
Remote Valet Mode
with Secondary Remote
NOTE 5
*Requires optional IntelliStart 4
n
NOTE 1: Press button 1 on the 16-channel master remote, you will hear one chirp. Press button 1 again, you will hear two
chirps.
n
NOTE 2: You will hear two chirps when all features are reset.
n
NOTE 3: When you hear two chirps, all remote controls will have been erased from the system memory. You mu st now add
the new and/or existing remote controls to the system (i.e., AutoProgram each remote that will be u sed with the
IntelliGuard 7000).
n
NOTE 4: Programs a 4-channel secondary, 16-channel master, or any other remote control from another Intell iGuard
system to arm or disarm the vehicle. For instance, to set button 13 of the other car’s master remot e control to arm/disarm
the system, select column 4, row 1, then transmit channel 13 from the remote you are programming. T he system will
respond with one chirp. Immediately transmit channel 13 again. The system will respond with two chi rps. Button 13 of the
other vehicle’s remote will now arm/disarm the system.
n
NOTE 5: This feature can be programmed onto the remote control of another IntelliGuard system, after that remote has
been programmed to arm/disarm this system. Select the row and column number, then transmit the unus ed button on the
other remote that you want to use to perform that function. The IntelliGuard Millennia will respond with the same number
of chirps as the row number. Please note that you must first set a button on the remote that will a rm/disarm the system
(column 4, row 1) before these others will be accepted.
10 In tel liGuard 7000/199