Programming instructions

the siren has been sounding, press on the transmitter to stop the

trigger and return the unit to the armed state. The system will not dis-

arm, but rather reset. This prevents you from disabling the system

should you wish to silence it without visually checking the vehicle. After

resetting the system, press again to disarm the system.

transmitter chirp muting

To temporarily turn off the arm or disarm chirps, use transmitter chirp

muting. Simply press on the transmitter, and the confirmation

chirp(s) will be eliminated for that one operation only. The parking

lights will flash to confirm the arm/disarm command. If you want the

arm/disarm chirps turned off permanently, please refer to the User-

Selectable Features section of this guide.

transmitter sensor disable

To temporarily disable a sensor input, arm the system, press

twice and then . The lights will flash four times and

all warn away trigger zones one, two, three, and eight are bypassed.

Press the buttons again; the lights flash four times and both warn away

and full trigger zones one, two, three, and eight are bypassed until the

system is disarmed. This can be performed anytime the system is armed.

1. Arm the system.

2. Press twice and then .

3. The lights will flash four times; all warn away zones are now

bypassed.

4. Transmit the sensor bypass channel again.