Programming instructions

35
© 2004 directed electronics, inc.
4. Siren chirps 1 time as confirmation of BlackJax bypassed.
5. Turn Ignition Off, siren chirps 3 times as confirmation of
exiting programming.
To return to normal BlackJax Operation
1. Turn ignition on.
2. Enter Pin code.
3. Within 10 seconds press .
4. Siren chirps 2 times as confirmation of BlackJax active.
5. Turn ignition off, siren chirps 3 times as confirmation of
exiting programming.
blackjax off warning indicator
Each time the ignition is turned off when BlackJax is bypassed the LED will
blink 10 times as warning that the BlackJax has been temporarily bypassed.
adjusting the proximity sensor
It is recommended that adjustments be performed away from fluores-
cent lighting, large metal structures, or confined areas that can affect
the sensor field. The alarm will exit adjustment mode automatically 60
nnoottee::
If ignition remains on after entering PIN code and no action for
10 seconds, unit will automatically exit programming mode without
chirps.
nnoottee::
If ignition remains on after entering PIN code and no action for
10 seconds, unit will automatically exit programming mode without
chirps.