Programming instructions

37
© 2004 directed electronics, inc.
z
Siren chirps 1 time.
z
Warn-away Zone adjustment has now been entered.
z
Warn-away Zone can now be adjusted.
5. Adjust Warn-away Zone
z
Press to increase sensitivity.
z
Press to decrease sensitivity.
z
The sensor Warn-away zone can be tested at any time
during adjustment and will generate 1 siren chirp each
time the zone is activated.
6. Press of the remote control to return to Primary zone
adjustment and lock in Warn Away zone setting.
z
Siren chirps 2 times
z
Primary zone can now be re-adjusted as described in
step 3.
z
Or press again to lock in primary zone setting
and exit programming mode.
z
The siren will chirp 3 times when sensor adjustment
mode has been exited.
z
Auto-Scroll for adjusting sensitivity - press and
hold or to increase or decrease sensitivi-
ty setting several levels rapidly.
adjusting the omnisensor
The Omnisensor is designed for ease of adjustment by the user and to
give the ultimate in impact detection without the possibility of false
triggers that are common with less sophisticated sensor.
While adjusting this sensor it is required that you strike the vehicle with
the amount force that is desired for the system to trigger.