Programming instructions

38
1. Disarm system
2. Transmit Channel 15 (Press 3 times then
1 time).
z
The LED will turn on and the siren will chirp 1 time.
z
Sensor test and adjustment mode is entered.
3. To test Primary (full trigger) zone.
z
Press of the remote control.
z
Siren will chirp 2 times.
z
Hit vehicle.
z
Siren chirps 1 time if hit hard enough to activate sensor.
4. Adjust Primary zone
z
Press of the remote control.
z
Siren chirps 2 times.
z
Sensor adjustment mode is entered.
z
Hit vehicle at the desired level of impact.
z
Sensor adjusts itself to the force of Hit.
z
Siren chirps 1 time as confirmation of adjustment.
z
Press of the remote control to lock adjustment.
5. To enter adjust Warn-away zone
z
Press .
z
Siren chirps 1 time.
z
Warn-away zone adjustment is entered.
6. To test Warn-away zone
nnoottee::
DO NOT strike window glass or flat sheet metal panels that can
dent easily. It is recommended that you only strike the metal pillars
between the windows, they are structurally sound enough not to dent.
ONLY strike the pillars using the heel of your hand, it is more than suf-
ficient for the sensor distinguish as a theft attempt.