Programming instructions

6
Button twice, then Button
These buttons enter safe start mode for manual transmission vehicles
and activate Autostart mode.
Button three times, then Button
These buttons adjust the dual-zone omnisensor.
Button three times, then Button
These buttons adjust the dual-zone radar sensor.
using your system
The buttons used in the instructions in this manual correspond to the
standard transmitter configuration. If your transmitter has been custom
configured, the icons on your transmitter buttons may not correspond
to the indicated functions.
arming
You can activate, or arm, the system by pressing on your trans-
mitter for one second. When the system arms, you will hear two short
siren sounds, or chirps, and see the parking lights flash twice. The LED
will begin to flash steadily. If the vehicle’s power door locks have been
connected to the system, the doors will lock.