Specifications

AMPLIFIER WIRING

Power Connections for the WCC-amplifiers

● WCC- Fuse Size: refer to specifications

● Power connections accept up to 8 AWG wire.

● 8 AWG power and ground wire recommended for optimal performance.

● Connect 12V+ to the battery through fuse holder. This connection provides +12V

main power to the amplifier.

● Power wire must be fused no more than 18" from battery.

● Ground amplifier to a good chassis ground as close as possible to the amplifier.

● Connect REM terminal to remote turn-on lead from source unit. This connection

provides +12V power to turn-on the amplifier.

● Add extra ground wire between the negative terminal of the battery and the

chassis.

NOTE: The addition of a ground wire from the battery to the chassis of the vehicle

improves the ability of the battery to supply power to the amplifier. This is recom-

mended because the current delivery of the factory electrical system was designed

only to accommodate electronics supplied by the auto manufacturer.