Specifications

5001, 8001 Mono Speaker Connections

The WCC-5001, and WCC-8001 amplifiers offer two positive and two negative output terminals

for ease of connecting the speakers to the amplifier. Since these are mono amplifiers, the speak-

er connectors are paralleled internally. Each amplifier is stable to 2W.

NOTE! The WCC-5001 and WCC-8001 are not designed to work in a bridged or

strapped configuration. Attempting to apply these configurations will dam-

age the amplifier and will not be covered under warranty.

HIGH LEVEL HARNESSES

NOTE! Do not connect the high level input connections to power, signal, or chassis

ground as damage to the head-unit outputs may result. The high-level inputs

are designed to work with either grounded or BTL speaker level outputs

(found on most head units).

NOTE! Also, to preclude the use of the High Level Harness, a speaker level to RCA

adapter is available (Directed p/n 55020) to convert any regular or high-pow-

ered speaker output to a preamp level, high impedance signal to drive the

amplifier.

6002, 5001, 8001 High Level Connections

Wire Color Input Connection

WHITE/BLACK - Left channel

BLACK Ground

WHITE + Left channel

GRAY/BLACK - Right channel

GRAY + Right channel

GND

+12V

REM

FUSEFUSE

( + )( - )

( - )

( + )

SPEAKER

4 Ohm

SPEAKER

4 Ohm