User guide

P. 12 User Guide
Intrusionalertviaremote
The remote will beep or vibrate for about 60 seconds when an intrusion from door, hood, trunk,
shock or ignition is detected. At the same time, the LCD remote will display “
ALARM” and “DOOR /
HOOD / TRUNK / SHOCK /
real time” (depending on the type of alarm) alternately. The icons of door,
hood, trunk and shock, as well as the red backlight, will be flashing (when the
BLITE is set ON).
A
larm Type LCD Text Icon Sound or Vibration
DOOR ALARM + DOOR
60 seconds
HOOD ALARM + HOOD 60 seconds
TRUNK ALARM + TRUNK 60 seconds
SHOCK ALARM + SHOCK 60 seconds
IGNITION ALARM + real time NONE NONE
The user can press the
or button to stop the alarm (unless TWO-STAGE Mode has been
programmed – one press then only mutes the siren; the user needs to press twice in order to
disarm the system).
RemoteStarterFeatures
RemoteDoorLocks
If your system was installed with the Remote Door Locks option, you will have the convenience of
remote keyless entry.
To UNLOCK your doors and DISARM the system:
1. Press and hold the
button for approx. 1 sec
2. The
icon will appear on the remote’s LCD screen
3. The siren will chirp twice to confirm that the doors have been unlocked, the Starter Kill
feature is disarmed (if it was installed) and that the Alarm is disabled.
To LOCK your doors and ARM the system:
1. Press and hold the
button for approx. 1 sec.
2. The
icon will appear on the remote’s LCD screen
3. The siren will chirp once to confirm that the doors have been locked, the Starter Kill
feature is enabled (if it was installed) and that the Alarm is armed.
RemoteTrunkRelease
If your system was installed with the Remote Trunk Release option, you can open your trunk by
pressing the
button until the remote displays the text “TRUNK” on the screen. In addition, this
will also disarm the alarm.