Specifications

Web-based management
RS2-4R
Release 1.0 03/04
5.3 System
133
The end of the update is indicated by one of the following messages:
D Update completed successfully.
D Update failed. Reason: incorrect file.
D Update failed. Reason: file damaged.
D Update failed. Reason: flash error.
V Close this browser window with "File: close" to return to the dia-
log software.
To start the new software after loading, restart the RS2-4R (see dialog “Re-
starting the switch” on page 153).
Note: You can define which configuration will be loaded by the switch during
reboot by the settings in the dialogs
“Defining the start configuration” on
page 135 and “Configure the network” on page 144.
Fig. 51: Dialog Update software
Delete the browser's cache contents after the software update. After a restart
your browser is able to load the new release of the Web-based interface.