Specifications

Web-based management
RS2-4R
Release 1.0 03/04
5.3 System
147
Note: After changing the password for write access, restart the Web inter-
face in order to access the switch.
Note: For security reasons, the passwords are not displayed. Make a note of
every change! You cannot access the switch without a valid password!
Note: In SNMP version 3, use more than 8 characters for the password, be-
cause many applications do not accept shorter passwords.
Access via a Web browser can be blocked with the dialog “WEB access” on
page 148.
Access at IP address level is restricted via the dialog “Access for IP address-
es” on page 149.
The Web-based Interface provides up to 4 different passwords:
D Read password SNMP version 3.
D Read/write password SNMP version 3. This is identical to the password
in the User Interface.
D Read password SNMP version 1/2c.
D Read/write password SNMP version 1/2c.
For security reasons, the read password and the read/write password must
not be identical.
V First select which password you want to change.
V Enter the old password in the line "Old password".
V Enter the new password in the line "New password".
V Repeat the new password in the line "Please re-enter".
Please note that passwords are case-sensitive.
V "Data encryption" encrypts the data of the Web-based management
which is transferred between your PC and the switch with SNMP V3.
You can set "Data encryption" differently for the access with read pass-
word and read/write password.