Specifications

Web-based management
160
5.5 Switching
RS2-4R
Release 1.0 03/04
5.5.2 Filtering Database
This table is used for displaying filters. Each row represents one filter. Filters
specify the way in which data packets are sent. They are set automatically by
the switch (learned status). Data packets whose destination addresses are
entered in the table are sent from the receiving port to the ports marked in the
table. Data packets whose destination addresses are not in the table are sent
from the receiving port to all other ports. The following status settings are
possible:
D learned: the filter was created automatically by the switch.
Fig. 63: Dialog Filter table
Note: If the redundancy manager is active, it is not possible to make perma-
nent unicast entries.
Note: In the filtering database you can create up to 56 filter for multicast
addresses.