Specifications

Web-based management
RS2-4R
Release 1.0 03/04
5.5 Switching
163
U Port settings
These settings apply to every individual port.
Variable Meaning Possible values State on delivery
STP State Switching STP/RSTP on/off at this port.
Switch STP off when connecting a
terminal device in order to avoid
unnecessary waiting periods.
enable, disable enable
Priority The port priority is the first byte of the
port identification.
16 < n*16< 240 128
Admin
Pathcost
Enter the path costs to indicate
preference for redundant paths. If the
value is "0", the switch automatically
calculates the path costs depending on
the transmission rate.
0 - 200 000 000 0
Remove Tag With the enable setting, the RS2-4R
removes the VLAN tag from the frames
which it sends at this port.
enable, disable enable
Admin Edge
Port
With Admin Edge Port you specify
whether a terminal device (= true) or an
(R)STP bridge (= false) shall be
connected to this port. During
reconfiguration, the Edge Port at a
terminal device can switch to
forwarding within 4 seconds. In any
event, the bridge detects a connected
(R)STP bridge and displays it under Ist
Edge Port.
true, false false
Admin Point-
ToPointt
The point-to-point connection makes a
direct connection between 2 RSTP
bridges, serving to keep the
reconfiguration time short. Select the
forceTrue value if there is a half-duplex
connection between 2 RSTP bridges.
auto, forceTrue,
forceFalse
auto
Table 13: STP/RSTP port settings