Specifications

User Interface
214
7.2 Operating the user interface
RS2-4R
Release 1.0 03/04
Fig. 70: Menu system parameters
U IP address
Enter the IP address of this RS2-4R here. The default setting of the
address is 0.0.0.0.
U Subnet mask
If you are working in a large network and are using network masks, you
can specify the mask of the subnet here. The default setting of the IP
address is 0.0.0.0.
U Gateway IP address
Here you enter the IP address of the gateway through which the will
address other subnets. If there is no such gateway, you can omit this
entry. The default setting of the IP address is 0.0.0.0.
System Parameter 149.218.112.101
Hirschmann ETHERNET Rail Switch 2
IP Address : [149.218.112.101]
Subnet Mask : [255.255.255.0 ]
Default Gateway : [0.0.0.0 ]
IP Configuration : < LOCAL >
HiDiscovery : < Enable >
MAC Address : 00:80:63:00:02:77
System Name : [Hirschmann RS2 ]
Note:
Set IP-Configuration <LOCAL> to use manual settings.
APPLY changes the state of the objects immediately and
saves the state to Non Volatile Memory.
MAIN MENU APPLY
Enter agent IP address in decimal dot format (e.g., 149.218.112.69)