Specifications

User Interface
RS2-4R
Release 1.0 03/04
7.2 Operating the user interface
219
7.2.5 Port Mirroring / Disable learning
This dialog gives you the option of viewing the data of all ports or of individual
ports (monitoring).
D By selecting Disable Learning, you can disable the learning function.
Consequently, the transmits all data from all ports to all ports.
D By selecting Port Mirroring, the mirrors all send/receive data of the
"Source " to the "Destination Module.Port". The functions as a normal
switch for the other ports.
D By selecting Normal Switching, you activate the learning function,
and it functions as a normal switch.
Note: The setting Normal Switching is activated after a restart.
Fig. 74: Menu Disable Learning
Port Mirroring / Disable Learning 149.218.112.101
Hirschmann ETHERNET Rail Switch 2
Port Mirroring: Source port: 0 Destination port: 0
Mode < Normal Switching >
Note:
Port Mirroring enables data packets from a source port to be copied to a
specified destination port. This has no other effect on the data packets
from the source port. When Port Mirroring is active, the specified
destination port can only be used for observing data.
Disable Learning allows you to capture all data packets received on every
port. (Data packets with destination addresses for which filters are set
manually or via the GMRP protocol will not be flooded)
Switching will be interrupted for a few seconds while enabling
mode Disable Learning.
MAIN MENU APPLY
Type in port number and press enter