Specifications

User Interface
220
7.2 Operating the user interface
RS2-4R
Release 1.0 03/04
7.2.6 Configuration
The RS2-4R has two configuration settings:
D the default setting and
D the user-defined setting.
This submenu offers the option of storing a user-defined configuration.
This configuration can
– be loaded automatically when restarting or
– be loaded with the default configuration again after restarting.
With Load after reset you can determine which configuration setting
will be active after a restart:
– default loads the default configuration.
– local loads the user-defined configuration from the flash memory.
– remote loads the user-defined configuration from the configuration file on
the tftp server.
With Load you determine which configuration is to be loaded:
– local loads the user-defined configuration from the flash memory.
– remote loads the user-defined configuration from the configuration file on
the tftp server.
With Save you determine where the configuration setting is saved:
– local saves the user-defined configuration in the flash memory.
– remote saves the user-defined configuration as a configuration file on
the tftp server.
– configadapter saves the user-defined configuration in the AutoConfig-
uration Adapter and in the flash memory.
Any changes in this window are accepted by choosing APPLY.
The path for storing the configuration data on the tftp server is displayed in
the line "URL".
tftp is not able to create a new file. Therefore create an empty file on the tftp
server before you "Save to URL".