Specifications

User Interface
RS2-4R
Release 1.0 03/04
7.2 Operating the user interface
221
Example to save to a tftp server
V Open a new file with any editor.
V Save the empty file to the appropriate path of the tftp server, including the
file name, e.g. /_01.cfg
V In the "URL" line, enter the path of the tftp server, e.g. tftp://
149.218.112.214//_01.cfg
.
Note: The configuration file includes all configuration data, including the
password. Therefore pay attention to the access rights on the tftp server.
Fig. 75: Menu Save/Load Configuration
The selection of the AutoConfiguration Adapter (ACA) for a memory opera-
tion opens a new window - after you choose Apply - with the request:
V Pull the terminal block off the RS2-4R and connect the ACA to the V.24
connection of the .
Then the RS2-4R performs the memory operation. The RM LED shows the
status of the memory operation (see
“RM - Redundancy Manager / ACA - Au-
toConfiguration Adapter (Green/yellow LED)” on page 87).
Save/Load Configuration 149.218.112.101
Hirschmann ETHERNET Rail Switch 2
Load after reset: < local configfile>
Load: < local configfile>
Save: < local configfile>
URL of remote configuration file: (e.g.: tftp://149.218.112.2/config.dat)
[tftp://0.0.0.0/file.bin ]
To load MIB-configuration after reset APPLY Load after reset
To load MIB-configuration APPLY Load
To save your current MIB-configuration APPLY Save
MAIN MENU APPLY Load after reset APPLY Load APPLY Save
Push space bar to select default, local or remote configuration file