Specifications

Installation and startup procedure
RS2-4R
Release 1.0 03/04
3.1 Safety instructions
33
U Qualification requirements for personnel
Qualified personnel as understood in this manual and the warning signs,
are persons who are familiar with the setup, assembly, startup, and
operation of this product and are appropriately qualified for their job. This
includes, for example, those persons who have been:
D trained or directed or authorized to switch on and off, to ground and to
label power circuits and devices or systems in accordance with current
safety engineering standards;
D trained or directed in the care and use of appropriate safety equipment
in accordance with
the current standards of safety engineering;
D trained in providing first aid.
U General Safety Instructions
This device is electrically operated. Adhere strictly to the safety
requirements relating to voltages applied to the device as described in
the operating instructions!
Failure to observe the information given in the warnings could result in
serious injury and/or major damage.
V Only personnel that have received appropriate training should operate
this device or work in its immediate vicinity. The personnel must be
fully familiar with all of the warnings and maintenance measures in
these operating instructions.
V Correct transport, storage, and assembly as well as careful operation
and maintenance are essential in ensuring safe and reliable operation
of this device.
V These products are only to be used in the manner indicated in this
version of the manual.
V Any work that may have to be performed on the electrical installation
should be performed by fully qualified technicians only.
Warning!
LED- or LASER components according to IEC 60825-1 (2001):
CLASS 1 LASER PRODUCT.
LIGHT EMITTING DIODE - CLASS 1 LED PRODUCT.