Specifications

Installation and startup procedure

RS2-4R

Release

1.0

03/04

3.2

Device installation

3.2 Device installation

3.2.1 Controls

U DIP switch

With the -pin DIP switch on the front panel of the RS2-4R

D the RM functionality (Redundancy Manager) can be switched on or off

with the RM switch

if the HIPER-Ring function is switched on. State on

delivery: switch position 0 (Off), i.e. RM function not active (see

“Redundant ring structure – HIPER-Ring” on page 114).

D the HIPER-Ring fuctionality can be switched on or off with the RING

switch. State on delivery: switch position 0 (Off), i.e. HIPER-Ring

function not active.

Fig. 2: 2-pin DIP switchr

V Check whether the switch default settings match your requirements.

RING RM Port 3 and Port 4 Redundancy Manager

0 - TP port: Autonegotiation,

FX port: 100 Mbit/s full duplex

off

1 0 Ring port: 100 Mbit/s full duplex off

1 1 Ring port: 100 Mbit/s full duplex on

Table 2: DIP switch function

RING

HIPER-Ring

Redundanz Manager