Specifications

Installation and startup procedure
40
3.2 Device installation
RS2-4R
Release 1.0 03/04
3.2.3 Assembly
On delivery, the device is ready for operation.
V Slide the upper snap-in guide of the RS2-4R into the top-hat rail and press
it down against the rail until it snaps into place.
Fig. 4: Assembly
Note: The front panel of the housing of the RS2-4R is grounded via a ground
connection.
Note: The housing must not be opened.
Note: The shielding ground of the industrial connectable twisted pair lines is
connected to the front panel as a conductor.