Specifications

Installation and startup procedure
56
3.4 Basic settings
RS2-4R
Release 1.0 03/04
V Start the HiDiscovery program.
Fig. 11: HiDiscovery
When HiDiscovery is started, it automatically searches the network for those
devices which support the HiDiscovery protocol.
HiDiscovery uses the first PC network card found. If your computer has
several network cards, you can select these in HiDiscovery on the toolbar.
HiDiscovery displays a line for every device which reacts to the HiDiscovery
protocol.
HiDiscovery enables you to identify the devices displayed.
V Select a device line.
V Click on the symbol with the two green dots in the tool bar to set the LEDs
for the selected device flashing. To switch off the flashing, click on the
symbol again.