Specifications

Installation and startup procedure

RS2-4R

Release

1.0

03/04

3.4

Basic settings

By double-clicking a line, you open a window in which you can enter the

device name and the IP parameter.

Fig. 12: HiDiscovery - assigning IP parameters

Note: For security reasons, switch off the HiDiscovery function for the device

in the Web-based interface, after you have assigned the IP parameters to the

device.

3.4.4 System configuration via BOOTP (bootstrap

protocol)

During startup operation the RS2-4R receives its configuration data

according to the "BOOTP process" flowchart

(see Fig. 13).

For the RS2-4R a BOOTP server should make available the following data:

# /etc/bootptab for BOOTP-daemon bootpd

# gw -- gateways

# ha -- hardware address

# ht -- hardware type

# ip -- IP address

# sm -- subnet mask