Specifications

Installation and startup procedure
58
3.4 Basic settings
RS2-4R
Release 1.0 03/04
# tc -- template
.global:\
:gw=0.0.0.0:\
:sm=255.255.240.0:
rs2_01:ht=ethernet:ha=008063086501:ip=149.218.17.83:tc=
.global:
rs2_02:ht=ethernet:ha=008063086502:ip=149.218.17.84:tc=
.global:
.
.
Lines that start with a '#' character are comment lines.
The lines under ".global:" make the configuration of several devices easier.
With the template (tc) you allocate the global configuration data (tc=.global:).
The direct allocation of hardware address and IP address occurs in the
device lines (rs2-0...).
V Enter one line for each device.
V After ha= enter the hardware address of the device.
V After ip= enter the IP address of the device.
The RS2-4R saves the configuration data received from the BOOTP server
into its flash memory.
To enable/disable BOOTP, see “IP configuration” on page 215 and “System
data” on page 130.